Sand Loop 레벨 203 솔루션

Step 1: Release blue sand.

Tap the blue sand container at the top left.

Blue sand starts flowing out and descends.

Step 2: Release yellow sand.

Tap the yellow sand container at the top center.

Yellow sand starts flowing out and descends alongside blue sand.

Step 3: Open the first gate to allow blue and yellow sand to flow to the mixing point and switch.

Tap the gate located directly below the blue and yellow sand streams.

The gate opens, blue and yellow sand mix into green, and the green sand activates the switch.

Step 4: Release red sand.

Tap the red sand container at the top right.

Red sand starts flowing out.

Step 5: Open the second gate (activated by the switch) to guide red sand further.

Tap the gate that was opened by the switch activation, located in the red sand's path.

The gate opens, allowing red sand to flow downwards.

Step 6: Open a gate on the red sand path to direct it into a pipe.

Tap the gate located on the right side, above the first red pipe segment.

The gate opens, and red sand flows into the pipe.

Step 7: Open a gate on the green sand path to direct it into a pipe.

Tap the gate located on the left side, above the first green pipe segment.

The gate opens, and green sand flows into the pipe.

Step 8: Open another gate on the red sand path.

Tap the gate located further down the red sand's path, near the middle-right.

The gate opens, allowing red sand to continue its flow.

Step 9: Open another gate on the green sand path.

Tap the gate located further down the green sand's path, near the middle-left.

The gate opens, allowing green sand to continue its flow.

Step 10: Open the final gate for red sand to enter its target.

Tap the last gate on the red sand's path, directly above the red target.

The gate opens, and red sand flows into the red target container.

Step 11: Open the final gate for green sand to enter its target.

Tap the last gate on the green sand's path, directly above the green target.

The gate opens, and green sand flows into the green target container.

Step 12: Wait for both target containers to fill completely.

No further taps required; observe the sand filling the targets.

Both red and green target containers are filled, and the 'Level Complete' notification appears.

Q: How do I create green sand in this level?

A: Green sand is formed by mixing blue and yellow sand. In this level, this occurs automatically once you release both colors and open the first gate that directs them to combine.

Q: What is the purpose of the switch?

A: The switch is activated by the mixed blue and yellow (green) sand. Its activation opens a specific gate, which is crucial for the red sand's path to proceed.

Q: What's the best order to release the sand colors?

A: Release blue and yellow sand first, as their combination is needed to activate a switch that opens the path for red sand. Once that path is open, you can release the red sand.