Sand Loop 레벨 96 솔루션

Step 1: Create a stable channel for blue sand.

Starting from under the blue sand sources on the top-left, draw a continuous, slightly curved line downwards and to the left, guiding it into the blue container at the bottom-left.

The drawn line is stable and forms a clear, distinct path for blue sand.

Step 2: Create a stable channel for red sand.

Starting from under the red sand sources on the top-right, draw a second continuous, slightly curved line downwards and to the right, guiding it into the red container at the bottom-right, ensuring it remains separate from the blue sand path.

The drawn line is stable and forms a clear, distinct path for red sand.

Step 3: Release all blue sand.

Tap on both blue sand source openings (top-left) to initiate their flow.

Both blue sand flows begin moving along the drawn channel.

Step 4: Release all red sand.

Tap on both red sand source openings (top-right) to initiate their flow.

Both red sand flows begin moving along the drawn channel.

Step 5: Fill both containers completely.

Observe the sand flow. The falling blocks will naturally push sand down without breaking the drawn lines in this specific solution. Wait for both containers to reach their required fill levels.

Both the blue and red containers are filled, and the 'LEVEL COMPLETE' message appears.

Q: How do I prevent the falling blocks from blocking my sand?

A: Draw your lines strategically to guide sand around the block's fall path. In this level, the blocks can actually help by pushing sand downwards if your channels are positioned correctly.

Q: My sand isn't flowing fast enough. What should I do?

A: Ensure your drawn lines are sufficiently steep and continuous to allow gravity to pull the sand efficiently. Jagged or flat lines can impede flow.

Q: How do I ensure the red and blue sand don't mix?

A: Create two completely separate and distinct channels for each sand color. Ensure there are no gaps or crossover points where the sand streams could combine.