Sand Loop 레벨 104 솔루션

Step 1: Initiate sand flow from the top-left section.

Swipe up on the red pin located at the top-left of the level (first from the left, top row).

Sand begins to fall into the first vertical channel.

Step 2: Direct sand downwards through the first vertical shaft.

Swipe up on the second red pin (middle-left), located to the right of the first vertical channel.

Sand flows past the initial horizontal block and continues its descent.

Step 3: Guide sand across the upper horizontal pathway.

Swipe up on the third red pin (top-right), located at the end of the upper horizontal channel.

Sand flows rightwards across the upper path and then begins to fall into the second vertical shaft.

Step 4: Open the path for sand to collect in the final wide area.

Swipe up on the fourth red pin (middle-right), located below the second vertical shaft and above the large open space.

Sand from the second vertical shaft flows into the spacious area above the container entrance.

Step 5: Allow sand to enter and fill the target container.

Swipe up on the fifth and final red pin (bottom-right), which directly blocks the entrance to the container.

Sand fills the container up to the marked white line, completing the level.

Q: What is the correct sequence to pull the pins in Level 104?

A: The video demonstrates pulling pins in this order: top-left, then middle-left, then top-right, then middle-right, and finally the bottom-right pin blocking the container.

Q: How do I make sure enough sand reaches the container?

A: Following the demonstrated pin-pulling sequence allows the sand to flow efficiently through all channels to fill the container. Pulling pins in the wrong order might lead to sand getting stuck or flowing away from the container.