Sand Loop 레벨 454 솔루션

Step 1: Draw a precise path to guide sand from the source to both containers simultaneously.

Start drawing a single, continuous line directly under the sand source on the top-left. Extend it horizontally to the right, then curve it downwards and slightly upwards to create an initial channel. Finally, angle the line steeply downwards, forming a 'U' shape that branches to guide sand evenly into both the left and right containers.

The sand begins to flow along the drawn line, splitting effectively to direct flow towards both containers.

Step 2: Ensure both containers are filled to their capacity.

Observe the sand flow. The drawn line's shape should maintain sufficient momentum and distribution for both the left and right containers to fill completely.

Both the left and right containers fill up simultaneously, and the 'Level Clear!' message appears.

Q: How can I ensure both containers fill evenly?

A: The key is the precise angle and curvature of your single drawn line. It needs to act as both a funnel and a splitter. The successful attempt demonstrates a line that creates a gentle ramp for initial flow, then curves to direct sand into both targets simultaneously.

Q: My sand isn't flowing correctly or gets stuck. What am I doing wrong?

A: Make sure your line is drawn smoothly and continuously, without any breaks or very sharp angles. The successful line starts directly under the sand source and provides a clear, downward path for the sand to maintain momentum.