Sand Loop 레벨 376 솔루션

Step 1: Start red sand flow

Tap the yellow breakable block located to the immediate right of the red sand starting point.

Red sand begins to flow downwards on the left side of the screen.

Step 2: Start blue sand flow

Tap the yellow breakable block located directly below the blue sand starting point, in the upper-middle section.

Blue sand begins to flow downwards.

Step 3: Clear red sand path (upper-middle)

Tap the next yellow breakable block in the red sand's path, located just above the horizontal row of unremovable blocks.

Red sand flows further down and collects above the main chamber.

Step 4: Start yellow sand flow

Tap the yellow breakable block located directly below the yellow sand starting point on the right side.

Yellow sand begins to flow downwards on the right side.

Step 5: Guide blue sand right

Tap the blue breakable block located to the right of the central blue sand flow.

Blue sand is now directed towards the right side of the level.

Step 6: Clear red sand path (lower-left)

Tap the yellow breakable block located directly above the red hopper.

Red sand begins to fall into the red hopper.

Step 7: Guide yellow/blue sand (center)

Tap the blue breakable block located in the center of the main chamber.

Yellow sand begins to move towards the center of the level, and blue sand's path is maintained.

Step 8: Clear red sand final entry

Tap the yellow breakable block located at the very bottom-left, ensuring a clear path for red sand into its hopper.

Red sand fully flows into the red hopper.

Step 9: Clear blue sand final entry

Tap the blue breakable block located at the very bottom-right, ensuring a clear path for blue sand into its hopper.

Blue sand fully flows into the blue hopper.

Step 10: Clear yellow sand final entry

Tap the red breakable block located at the very bottom-center, ensuring a clear path for yellow sand into its hopper.

Yellow sand fully flows into the yellow hopper, completing the level.

Q: What is the optimal order to clear the blocks in Sand Loop Level 376?

A: Based on the walkthrough, it's effective to first open the initial paths for all three sand colors (red, then blue, then yellow), then systematically clear the remaining blocks from top to bottom, ensuring each color has a direct, unobstructed path to its specific hopper. Prioritize blocks that directly open pathways for specific colors, and watch for potential intersections.

Q: How do I prevent different colored sands from mixing?

A: The key is strategic block removal. Avoid clearing blocks that would allow sand of different colors to flow into the same channel or hopper. In this level, paths are largely separate, but carefully observe the flow after each block removal to prevent accidental mixing, especially in the central area where paths converge.