Sand Loop 레벨 126 솔루션

Step 1: Release the blue sand to begin its journey towards the target.

Tap and remove the red rectangular block positioned directly beneath the blue sand's starting point on the far left.

Blue sand begins to flow downwards and to the right.

Step 2: Release the yellow sand and create a full path for the blue sand.

Tap and remove the red rectangular block positioned directly beneath the yellow sand's starting point on the right.

Yellow sand begins to flow downwards, and the blue sand's path through the center of the level becomes clear.

Step 3: Guide the yellow sand upwards into its designated container.

Tap the fan located on the right side of the screen, below where the yellow sand is currently flowing, to activate it.

The fan starts blowing, pushing the yellow sand upwards into the container on the top right.

Step 4: Ensure blue sand reaches its target.

No further operations are explicitly required for the blue sand at this stage; gravity will naturally guide it. Observe its flow.

Blue sand continues to flow leftward under the platform where the fan is, and then drops into its container on the far left.

Q: What is the correct order to remove the red blocks?

A: First, remove the red block under the blue sand (left side), then remove the red block under the yellow sand (right side).

Q: How do I get the yellow sand to go up to its target container?

A: You need to activate the fan by tapping it. It will blow the yellow sand upwards.

Q: Should I activate the fan before or after releasing the sand?

A: Activate the fan after both sand types have been released and the yellow sand is near the fan's position.